The Professional Basement Finishing Edge
It’ll function as the first to admit that anyone can develop a basement finishing project, however completing your home remodeling project using the quality finish that you simply deserve needs a professional edge.
One way you can have the professional edge when completing your basement finishing project is utilizing the technique of coping interior miters.
What can it mean to cope with interior miters?
When baseboard or anything else of trim (like chair rail or crown molding) retreats into most, you are likely to have most where two individual items of trim come together. The trick is to get these two pieces of trim to look together in a fashion that they look like one continuous bit of trim. The way to do this is to deal-cut this inside joint.
The oft-used technique of mitering both items of trim, jamming them in the corner, then simply nailing the crooks to the wall is not suitable to your basement finishing project. Because of how drywall corners should be done, no wall corner is precisely 90, or 45, or no matter the supposed angle could be. Also, because even 1/32″ long can ruin the alignment from the joints, you can anticipate an incredibly noticeable gap within the miter joint of your respective trim.
Many installers are o.k. with this gap. Just caulk and paint over it they are saying. However, soon after caulking and painting, modifications in temperature and humidity may cause that caulking to shrink leaving a visible gap inside your miter joint.
Let’s face it, whenever you pay good money for similar to a basement finishing project, methods that provide a professional edge are important to you. Cope-cutting is an approach to cutting inside corners, whereby one uncut piece of trim extends up in the corner, as well as a cut, is manufactured on the other instrument a little bit of trim to check the profile of the one already inside the corner. When the second bit of trim is slid into the first, any gap almost entirely disappears, enabling a lovely finish after paint.
Why don’t lots more people cope with their inside corners?
Simple, it requires added time. But some things are simply worth the wait.
This technique may be used anywhere you the trim with your basement finishing project comes with an inside corner. Wainscots, drink ledges, crown molding, etc., all have inside corners which should almost always be coped.
Give your basement finishing project that “Professional Edge” and make sure your contractor understands your need inside miters being coped.